Titolo:  Far-Field Boundary Conditions for Calculation of Hole-Drilling Residual Stress Calibration Coefficients
Data di pubblicazione:  2017
Data di prima pubblicazione on-line:  2016
Autori: 
Autori:  Baldi, Antonio
Numero degli autori:  1
Lingua:  Inglese
Presenza coautori internazionali:  no
Rivista:  EXPERIMENTAL MECHANICS
Volume:  57
Fascicolo:  4
Pagina iniziale:  659
Pagina finale:  664
Numero di pagine:  6
Digital Object Identifier (DOI):  http://dx.doi.org/10.1007/s11340-016-0235-1
Codice identificativo Scopus:  2-s2.0-84994452881
Codice identificativo ISI:  WOS:000398161000013
URL:  https://link.springer.com/article/10.1007/s11340-016-0235-1
Abstract:  The Hole-Drilling method for residual stress measurement, both in its standard version based on strain gauge rosettes (ASTM E837-08e1 2008) and its derivative using optical methods for estimating the displacement field around the hole (Baldi (2005) J Eng Mater Technol 127(2):165–169; Schajer and Steinzig (2005) Exp Mech 45(6):526–532; Schajer (2010) Exp Mech 50(2):159–168), relies on numerical calibrated coefficients (A and B) to correlate the experimentally acquired strains (displacements) with residual stress components. To estimate the A and B coefficients, two FEM (Finite Element Method) computations are required, the former related to a hydrostatic stress state, the latter to a pure shear case. Both can be implemented using either a semi-analytical approach (i.e. an axis-symmetric mesh expanded in the tangential direction using a Fourier series) or a tri-dimensional mesh, usually exploiting the double symmetry of the problem. Whatever the approach selected, the definition of constraints to be applied to the outer boundary is critical because the hole-drilling method assumes an infinite plate, thus both the usual solutions—fully constrained or free boundaries—are unable to correctly describe the theoretical situation. In the following, the problem of correct simulation of the infinite domain will be discussed and two simple and effective solutions will be proposed.
Parole chiave:  Residual stress; Hole drilling; Calibration coefficients; Finite element analysis; Boundary conditions
Tipologia: 1.1 Articolo in rivista

File in questo prodotto:
File Descrizione Tipologia Licenza  
HD_FEM_BC-R1.pdf  versione post-print Open Access Visualizza/Apri
Baldi2017_Article_Far-FieldBoundaryConditionsFor.pdf  articolo versione editoriale Administrator   Richiedi una copia

Questionario e social

Condividi su: